〉The Panasonic servo motor applied is precise, highly effective and stable
〉The parameter adjustment of the equipment is technically simple and short, which can reduce the debugging time significantly
〉Adjustment shall be made by touch screen, including the size of the cutter, wire length, opening length, tightness and length of torsion wire and the length of tin pick-up
〉It can detect the low gas pressure, abnormal motor and belt automatically. In case that abnormality happens to the equipment, it will shut down automatically and the touch screen then displays the cause and debugging steps, so that the technicians can remove the troubles very quickly
BX-100 Full Automatic Double-ended Torsion Wire Tin Pick-up Machine
·Equipment characteristics:
〉The Panasonic servo motor applied is precise, highly effective and stable
〉The parameter adjustment of the equipment is technically simple and short, which can reduce the debugging time significantly
〉Adjustment shall be made by touch screen, including the size of the cutter, wire length, opening length, tightness and length of torsion wire and the length of tin pick-up
〉It can detect the low gas pressure, abnormal motor and belt automatically. In case that abnormality happens to the equipment, it will shut down automatically and the touch screen then displays the cause and debugging steps, so that the technicians can remove the troubles very quickly
·equipment characteristics：|
Dimension: |
1700 (L) * 700 (W)* 1,300 (H) |
|
Weight: |
280KG |
|
Air: |
6+-0.6kg/cm3 |
|
Power: |
220V single-phase 50/60HZ 0.6KW |
|
Noise : |
40dB |
|
QOperating environment: |
QOperating environment: |
|
Requirements for the surrounding environment: |
no corrosive gas |
|
Control system: |
PLC |
|
Display system: |
intelligent man-machine dialogue interface |
|
Functions: |
line cutoff, peeling of single end and double ends, semi-peeling of single end and double ends, torsion wire of single end and double ends, tin pick-up of single end and double ends |
|
Output: |
8,000-13,000 (determined based on the wire) |
|
Scope of the processed wires: |
AWG#3 - AWG#20 |
|
Length of wire cutting ： |
15mm-550mm (the shortest cutoff length shall be adjusted based on the peeling size) |
|
Precision of wire cutting: |
below 1m+ cutoff length * 0.2% |
|
Opening length: |
0-10mm |
|
Length of torsion wire: |
3mm-10mm |
|
Length of tin pick-up: |
0.5mm-10mm |
EcoCut 3300 file